LTM10C348U
LTM10C348U is LCD Module manufactured by Toshiba.
APPROVAL SIGNATURE
SPECIFICATION
FOR TOSHIBA TFT-LCD MODULE
SPECIFICATION No. :
NL-LTM10C348U-11
DATE OF ISSUE : 2000-07-26 (DATE OF EXPIRY : 2003-07-26)
T. Nakagawa
Senior Manager Liquid Crystal Display Quality Assurance Dept. Liquid Crystal Display Div. <Engineering Department to contact as per SPECIFICATION> Liquid Crystal Display Device Marketing & Engineering Dept. Liquid Crystal Display Div. TOSHIBA Corporation 1-9-2, Hatara-cho, Fukaya-shi, Saitama, 366-8510, JAPAN
..net
Specification No.
Sheet 1
Revision
Date Sheet (New) Item Old New
History
Reason
LIQUID CRYSTAL DISPLAY DIVISION
Date:2000-07-26 Date:
←# Special ←& Addition ← Change
New No. NL-LTM10C348U-11U Old No.
Specification No.
Sheet 2
Caution and Handling Precaution
For your end user's safety, it is strongly advised that the items with"6"should be included in the instruction manual of the system which may be issued by your organization.
For Safety Warning
(1) Toshiba's Standard LCD modules have not been customized for operation in extreme environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic. Since they must never be installed in aircraft navigation control systems (such as, but not limited to Traffic Collision System and Air traffic Indicator), in military defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical device or patient life-support systems. (2) DISCONNECT POWER SUPPLY before handling LCD module. DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's (hereinafter called "FL") connector or cable in order to prevent electric shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on. (3) Make sure to insert the module FL connector to the inverter connector in correct position. Do not insert in irregular position....
