TA48015F Datasheet | Toshiba

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic 1.5 V Three-Terminal Low Dropout Voltage Regulator with Output Current of 1 A The TA48015F consists of fixed-positive-output, low-dropout regulators with an output current of 1 A (max) that utilize V-PNP transistors for the output stage. This product responds to the need for low-voltage and low-power dissipation devices for use in consumer electronics and industrial appliances. Features z Maximum output current: 1 A z Output voltage accuracy: VOUT ± 3% (@Tj = 25°C) z Low standby current: 800 μA (typ.) (@IOUT = 0 A) z Low starting quiescent current z Low-dropout voltage: VD = 0.8 V (max) (@IOUT = 0.5 A) z Protection function: overheat /overcurrent z Package type: PW-Mold z TA48015F has a lead bending type package which is a surface-mountable package and can be used for reflow soldering. Pin Assignment Marking Marking side 132 IN GND OUT (1) TA48015F (2) TA48015F (TE16L1, N) Weight HSIP3-P-2.30B: 0.36 g (typ.) HSOP3-P-2.30D: 0.36 g (typ.) 48015F Part No. (or abbreviation code) Lot No. (weekly code) A line indicates Lead(Pb)-Free Finish. The product(s) in this document (“Product”) contain functions intended to protect the Product from temporary small overloads such as minor short-term overcurrent or overheating. The protective functions do not necessarily protect Product under all circumstances. When incorporating Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve the Product of such overload conditions immediately upon occurrence. For details, please refer to the notes appearing below in this document and other documents referenced in this document. 2008-04-22 How to Order Product No. (1) TA48015F (2) TA48015F (TE16L1, N) Block Diagram Package PW-Mold: Straight-lead package PW-Mold: Surface-mount package Packing Type and Unit for Orders Loose in bag: 200 (1 bag) Embossed-tape...