Datasheet4U Logo Datasheet4U.com

TA7291AP Datasheet Full-bridge Driver

Manufacturer: Toshiba

Overview: TA7291AP/AS(J)/AF TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA7291AP,TA7291AS(J),TA7291AF Full-Bridge Driver for DC Motors (driver for controlling the forward and reverse rotations) The TA7291AP/TA7291AS (J)/TA7291AF is a full-bridge driver to control the forward and reverse rotations. Each driver can select one of four modes: CW, CCW, stop, brake. The TA7291AP is designed to provide output currents of 1.0 A (typ.) and 2.0 A (peak). The TA7291AS (J)/TA7291AF is designed to provide output currents of 0.4 A (typ.) and 1.2 A (peak). There are two different power supply pins for each driver: one on the output side and the other on the control side of the driver. Also, there is the Vref pin on the output side. This pin is available for adjusting the voltage supplied to the motor. The input circuit of the driver is patible with CMOS logic because it draws a small amount of input current.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

7 2 11 Supply voltage pin for Logic 8 6 15 Supply voltage pin for motor driver 4 8 5 Supply voltage pin for control 1 5 1 Ground pin 5 9 7 Input pin 6 1 9 Input pin 2 7 4 Output pin 10 3 13 Output pin AP type: Pin 3 and 9 are NC.

AS (J) type: Pin 4 is NC.

AF type: Pin 2, 3,

Key Features

  • Wide range of operating voltage: VCC (opr. ) = 4.5 V to 27 V : VS (opr. ) = 4.5 V to 27 V : Vref (opr. ) = 4.5 V to 27 V Vref must be ≤ VS.
  • Output current: AP type 1.0 A (typ. ) 2.0 A (peak) : AS (J)/AF type 0.4 A (typ. ) 1.2 A (peak).
  • Thermal shutdown and overcurrent protection.
  • Flyback diodes.
  • Hysteresis for all inputs.
  • Standby mode available TA7291AP TA7291AS (J) TA7291AF Weight HSIP10-P-2.54: 2.47 g (typ. ) SIP9-P-2.54A: 0.92 g (typ. ) HSOP16-P-300-1.00: 0.50 g (ty.

TA7291AP Distributor