Datasheet4U Logo Datasheet4U.com

TB6613FTG - BiCD Integrated Circuit Silicon Monolithic

Key Features

  • Motor power supply voltage: VM ≤ 6 V (max) Control power supply voltage: VCC = 3 V to 5.5 V Output current: IOUT ≤ 0.8 A (max) Complementally P- and N-channel LDMOS output transistors Output ON-resistance: RON (upper and lower sum) = 1.5 Ω (@VM = VCC = 5 V typ. ) Channels A, B, C and D.
  • Four H-bridge drivers capable of PWM constant-current control Supports up to two two-phase bipolar stepping motors (STMs) or up to four actuators.

📥 Download Datasheet

Datasheet Details

Part number TB6613FTG
Manufacturer Toshiba
File Size 460.35 KB
Description BiCD Integrated Circuit Silicon Monolithic
Datasheet download datasheet TB6613FTG Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TB66 6.0A Single-Phase Silicon Bridge Rectifier TAITRON
TB6600 Stepper Motor Driver User Guide DFROBOT
TB6608FNG Stepping Motor Driver Toshiba Semiconductor
TB66G (TB605G - TB610G) 6.0A Glass Passivated Bridge Rectifier TAITRON
TB605 6.0A Single-Phase Silicon Bridge Rectifier TAITRON

Other Datasheets by Toshiba

Part Number Description
TB6612FNG Dual DC Motor Driver
TB6614FNG DC Motor Driver
TB6615PG STEPPING MOTOR CONTROLLER/DRIVER
TB6617FNG H-Bridge driver IC
TB6600FG PWM Chopper-Type bipolar Stepping Motor Driver IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TB6613FTG TOSHIBA BiCD Integrated Circuit Silicon Monolithic TB6613FTG DC and Stepping Motor Driver The TB6613FTG is a DC motor driver IC using LDMOS output transistors with low ON-resistance. The TB6613FTG incorporates five PWM constant-current H-bridge drivers, of which four drivers can be used for micro stepping motor drives of up to two stepping motors. The TB6613FTG is best suited to control various lens actuators in digital still cameras. The three-wire serial interface provides control over the drivers, thus reducing the number of lines required for interfacing with the control IC. Weight: 0.05 g (typ.) Features • • • • • Motor power supply voltage: VM ≤ 6 V (max) Control power supply voltage: VCC = 3 V to 5.5 V Output current: IOUT ≤ 0.