Datasheet4U Logo Datasheet4U.com

TC74HC375AF Datasheet 4-bit D-type Latch

Manufacturer: Toshiba

Overview: TC74HC375AP/AF TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC375AP, TC74HC375AF 4-Bit D Type Latch The TC74HC375A is a high speed CMOS D-TYPE LATCH fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. It contains two groups of 2-bit latches controlled by an enable input (G1·2 or G3·4) and each group can be used in different circuits. Data applied to the data inputs are transferred to the Q and Q outputs whin the enable inputs is high. When the enable input is low, the outputs are not affected. All inputs are equipped with protection circuits against static discharge or transient excess voltage.

This datasheet includes multiple variants, all published together in a single manufacturer document.

Key Features

  • High speed: tpd = 14 ns (typ. ) at VCC = 5 V.
  • Low power dissipation: ICC = 4 μA (max) at Ta = 25°C.
  • High noise immunity: VNIH = VNIL = 28% VCC (min).
  • Output drive capability: 10 LSTTL loads.
  • Symmetrical output impedance: |IOH| = IOL = 4 mA (min).
  • Balanced propagation delays: tpLH ∼.
  • tpHL.
  • Wide operating voltage range: VCC (opr) = 2 to 6 V.
  • Pin and function compatible with 74LS375 Pin Assignment TC74HC375AP TC74HC375.

More Datasheets from Toshiba

Part Number Description
TC74HC375AP 4-Bit D-Type Latch
TC74HC107AF Dual J-K Flip-Flop
TC74HC107AFN DUAL J-K FLIP-FLOP
TC74HC107AP Dual J-K Flip-Flop
TC74HC109AF Dual J-K Flip-Flop
TC74HC109AFN DUAL J-K FLIP-FLOP
TC74HC109AP Dual J-K Flip-Flop
TC74HC10AF Triple 3-Input NAND Gate
TC74HC10AFN TRIPLE 3-INPUT NAND GATE
TC74HC10AP Triple 3-Input NAND Gate

TC74HC375AF Distributor