TC74VHC123AFT Datasheet | Toshiba

TC74VHC123,221AF/AFN/AFT/AFK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VHC123AF,TC74VHC123AFN,TC74VHC123AFT,TC74VHC123AFK TC74VHC221AF,TC74VHC221AFN,TC74VHC221AFT,TC74VHC221AFK Dual Monostable Multivibrator TC74VHC123AF/AFN/AFT/AFK Retriggerble TC74VHC221AF/AFN/AFT/AFK Non-Retriggerble Note: xxx FN (JEDEC SOP) is not available in Japan. TC74VHC123AF, TC74VHC221AF The TC74VHC123A/221A are high speed CMOS MONOSTABLE MULTIVIBRATOR fabricated with silicon gate C2MOS technology. There are two trigger inputs, A input (negative edge), and B input (positive edge). These inputs are valid for a slow rise/fall time signal (tr = tf = 1 s) as they are schmitt trigger inputs. This device may also be triggered by using CLR input (positive edge). After triggering, the output stays in a MONOSTABLE state for a time period determined by the external resistor and capacitor (RX, CX). A low level at the CLR input breaks this state. Limits for CX and RX are: External capacitor, CX: No limit External resistor, RX: VCC = 2.0 V more than 5 kΩ VCC ≥ 3.0 V more than 1 kΩ An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages. Features - High speed: tpd = 8.1 ns (typ.) at VCC = 5 V - Low power dissipation Standby state: 4 μA (max) at Ta = 25°C Active state: 600 μA (max) at Ta = 25°C - High noise immunity: VNIH = VNIL = 28% VCC (min) - Power down protection is equipped with all inputs. - Balanced propagation delays: tp LH ∼- tp HL - Wide operating voltage range: VCC (opr) = 2 to 5.5 V - Pin and function patible with 74HC123A/221A TC74VHC123AFN, TC74VHC221AFN TC74VHC123AFT, TC74VHC221AFT TC74VHC123AFK, TC74VHC221AFK Weight SOP16-P-300-1.27A SOL16-P-150-1.27 TSSOP16-P-0044-0.65A VSSOP16-P-0030-0.50 : 0.18 g (typ.)...