Datasheet4U Logo Datasheet4U.com

TC74VHC221AFT - DUAL MONOSTABLE MULTIVIBRATOR

General Description

(1) Standby state The external capacitor (CX) is fully charged to VCC in the stand-by state.

triggering, the QP and QN transistors which are connected to the RX/CX node are in the off state.

Key Features

  • High speed: tpd = 8.1 ns (typ. ) at VCC = 5 V.
  • Low power dissipation Standby state: 4 μA (max) at Ta = 25°C Active state: 600 μA (max) at Ta = 25°C.
  • High noise immunity: VNIH = VNIL = 28% VCC (min).
  • Power down protection is equipped with all inputs.
  • Balanced propagation delays: tpLH ∼.
  • tpHL.
  • Wide operating voltage range: VCC (opr) = 2 to 5.5 V.
  • Pin and function compatible with 74HC123A/221A TC74VHC123AFN, TC74VHC221AFN TC7.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TC74VHC03F Quad 2-Input NAND Gate Toshiba Semiconductor
TC74VHC03FK Quad 2-Input NAND Gate Toshiba Semiconductor
TC74VHC03FN Quad 2-Input NAND Gate Toshiba Semiconductor
TC74VHC03FT Quad 2-Input NAND Gate Toshiba Semiconductor
TC74VHC9273FK Octal D-Type Flip-Flop Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TC74VHC221AF Dual Monostable Multivibrator
TC74VHC221AFK Dual Monostable Multivibrator
TC74VHC221AFN DUAL MONOSTABLE MULTIVIBRATOR
TC74VHC20F Dual 4-Input NAND Gate
TC74VHC20FK Dual 4-Input NAND Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TC74VHC123,221AF/AFN/AFT/AFK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VHC123AF,TC74VHC123AFN,TC74VHC123AFT,TC74VHC123AFK TC74VHC221AF,TC74VHC221AFN,TC74VHC221AFT,TC74VHC221AFK Dual Monostable Multivibrator TC74VHC123AF/AFN/AFT/AFK Retriggerble TC74VHC221AF/AFN/AFT/AFK Non-Retriggerble Note: xxxFN (JEDEC SOP) is not available in Japan. TC74VHC123AF, TC74VHC221AF The TC74VHC123A/221A are high speed CMOS MONOSTABLE MULTIVIBRATOR fabricated with silicon gate C2MOS technology. There are two trigger inputs, A input (negative edge), and B input (positive edge). These inputs are valid for a slow rise/fall time signal (tr = tf = 1 s) as they are schmitt trigger inputs. This device may also be triggered by using CLR input (positive edge).