Description
1
NC Not connected
2
NC Not connected
3
IN2 Control input 2 pin
4
IN1 Control input 1 pin
5
VCC Power supply pin for logic block
6
/STBY Standby input
7
NC Not connected
8
NC Not connected
9
VM Power supply pin for output
10
GND Ground pin
11
O2 Output 2 pin
12
O2 Output 2 pi
Features
- Power supply voltage for motor
: VM=18 V(Absolute Maximum Ratings).
- Power supply voltage for control
: VCC=6 V(Absolute Maximum Ratings).
- Output current
: IOUT=2.1 A(Absolute Maximum Ratings).
- Output ON resistance
: Ron(upper and lower sum)=0.4 Ω(Typ. ).
- Internal pull-down resistors on inputs : 200 kΩ(Typ. ).
- Built-in over current detection(ISD), thermal shutdwon(TSD) circuit, and under voltage lockout(UVLO) circuit.
- Small.
TC78H630FNG Datasheet
