TC7SPB9306TU Datasheet | Toshiba

TC7SPB9306TU,TC7SPB9307TU CMOS Digital Integrated Circuits Silicon Monolithic TC7SPB9306TU,TC7SPB9307TU 1. Functional Description - Low-Voltage, Low-Power 1-Bit Dual-Supply Bus Switch 2. General The TC7SPB9306TU and TC7SPB9307TU are CMOS 1-bit dual-supply bus switches that can provide an interface between two nodes at different voltage levels. These devices can be connected to two independent power supplies. VCCA supports 1.8 V, 2.5 V and 3.3 V power supplies, whereas VCCB supports 2.5 V, 3.3 V and 5.0 V power supplies. Bidirectional level-shifting is possible by simply adding external pull-up resistors between the A/B data lines and the VCCA/VCCB supplies. There is no restriction on the relative magnitude of the A and B voltages; both the A and B data lines can be pulled up to arbitrary power supplies. The enable signal can be used to disable the device so that the buses are effectively isolated. For the TC7SPB9306TU, Output Enable (OE) is active-High: When OE is High, the switch is on; when Low, the switch is off. For the TC7SPB9307TU, Output Enable (OE) is active-Low: When OE is Low, the switch is on; when High, the switch is off. The TC7SPB9306TU and TC7SPB9307TU supports power-down protection at the OE, OE input, with OE, OE being 5.5 V tolerant. The channels consist of n-type MOSFETs. All the inputs provide protection against electrostatic discharge. 3. Features (1) Operating voltage: 1.8 V to 2.5 V / 1.8 V to 3.3 V / 1.8 V to 5.0 V / 2.5 V to 3.3 V / 2.5 V to 5.0 V / 3.3 V to 5.0 V bidirectional interface (2) Operating voltage: VCCA = 1.65 to 5.0 V, VCCB = 2.3 to 5.5 V (3) Low ON-resistance: RON = 5.0 Ω (typ.) @ VIS = 0 V, IIS = 30 m A, VCCA = 3.0 V, VCCB = 4.5 V (4) ESD performance: Human Body Model ≥ ±2000 V (5) 5.5 V tolerance and power-down protection at the Output Enable input. (6) Packages: UF6 4. Packaging UF6 ©2016-2020 Toshiba Electronic Devices & Storage Corporation Start of mercial production 2008-08 2020-12-23 Rev.2.0 5. Pin...