TLP714F
TLP714F is Photocoupler manufactured by Toshiba.
Features
(1) Inverter logic type (open collector output) (2) Package: SDIP6 (3) Operating temperature: -40 to 125 (4) Supply voltage: -0.5 to 30 V (5) Threshold input current: 5.0 m A (max) (6) Supply current: 1.3 m A (max) (7) Propagation delay time: tp HL = 400 ns (max), tp LH = 550 ns (max) (8) Pulse width distortion: 400 ns (max) (9) mon-mode transient immunity: ±20 k V/µs (min) (10) Isolation voltage: 5000 Vrms (min) (11) Safety standards
UL-approved: UL1577, File No.E67349 c UL-approved: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN60747-5-5 (Note 1) Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (D4).
©2016 Toshiba Corporation
Start of mercial production
2011-09
2016-02-29 Rev.5.0
4. Packaging and Pin Configuration
11-5J101S
5. Internal Circuit
1: Anode 2: N.C. 3: Cathode 4: GND 5: VO (Output) 6: VCC
6. Principle of Operation 6.1. Truth Table
Input H L
LED ON OFF
Output L H
6.2. Mechanical Parameters
Characteristics
Creepage distances Clearance distances Internal isolation thickness
7.62-mm Pitch TLP714 7.0 (min) 7.0 (min) 0.4 (min)
10.16-mm Pitch TLP714F
Unit
8.0 (min) mm
8.0 (min)
0.4 (min)
©2016 Toshiba Corporation
2016-02-29 Rev.5.0
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25)
Characteristics
Symbol Note
Rating
Unit
LED Input forward current Input forward current derating
(Ta ≥ 116)
IF ∆IF/∆Ta
20 m A
-0.6 m A/
Input forward current...
