TMP90P802A Datasheet | Toshiba

TOSHIBA TLCS-90 Series CMOS 8- Bit Microcontrollers TMP90P802AP/TMP90P802AM 1. Outline and Characteristics The TMP90P802A is a system evaluation LSI having a built in One-Time PROM for TMP90C802A. A programming and verification for internal PROM is achieved by using a general EPROM programmer with an adapter socket. The function of this device is exactly same as the TMP90C802A by programming to the internal PROM. The following are the memory map of TMP91C640 and TMP90C840A. Parts No. TMP90P802AP TMP90P802AM OTP 8192 x 8bit 256 x 8bit Package 40-DIP 40-DIP Adapter Socket No. BM1158 BM1159 The information contained here is subject to change without notice. The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic equipments (office equipment, munication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, bustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA. TOSHIBA CORPORATION 1/14 .Data Sheet.in Figure 1. TMP90C802A Block Diagram 2/14 TOSHIBA CORPORATION .Data Sheet.in 2. Pin Assignment and Functions The assignment of input/output pins, their names and functions are described below. 2.1 Pin Assignment Figure 2.1 (1) shows...