AM55-0016SMB Datasheet | Tyco Electronics

Switched Low Noise Amplifier, 800-1000 MHz AM55-0016 AM55-0016 Switched Low Noise Amplifier 800 - 1000 MHz Features - MSOP-8 R 010 ID PIN - - - - High Gain State: - Gain: 16d B, Noise Figure: 1.6d B - Input IP3: +3d Bm (@2.7V, 25m A) Low Gain State: - Insertion Loss: 5d B, Input IP3: +24d Bm Single Supply: +2.7 to +5 VDC Low Cost MSOP-8 Plastic Package Adjustable current: 10 to 30 m A with external resistor Functional Block Diagram 0 118 .020 RF IN RF OUT -B- Description M/A-’s AM55-0016 is a high dynamic range, switchable low noise amplifier in a low cost, MSOP 8-lead, surface mount, plastic package. The design utilizes a patented switching technique to provide a low insertion loss, high input IP3 bypass state in parallel with the high gain, low noise state. The LNA employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The AM55-0016 also Features flexible biasing to control the current consumption vs. dynamic range trade-off. Its current can be controlled over a range of 10 m A to 30 m A with an external resistor. Typical applications include receiver front ends in cellular band CDMA handsets. It is also useful as a switched gain block, buffer or driver in portable cellular systems. The AM55-0016 is fabricated using a low-cost 0.5-micron gate length Ga As MESFET process. The process Features full passivation for increased performance and reliability. 0 118 4X 12° 4X 12° 0 034 0 040 3° 0.007 0 013 0 008 0 0215 Ordering Information Part Number AM55-0016 AM55-0016TR AM55-0016RTR AM55-0016SMB Package MSOP 8-Lead Plastic Package Forward Tape and Reel- Reverse Tape and Reel- Designer’s Kit - If specific reel size is required, consult factory for part...