HH-105
HH-105 is Hybrid Junction manufactured by Tyco Electronics.
Features q q
V2.00
0°
- 180° Hybrid in TO-5 Package High Isolation
(from -55°C to +85°C) 20-300 MHz 1.0 d B Max 28 d B Min 0.25 d B Max-
- 1.3:1 Max 2° Max-
- Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) MOUNTING AREA: 0.1 SQ. IN. 0.6 SQ. CM. WEIGHT (APPROX.): 0.11 OUNCES 3 GRAMS
Guaranteed Specifications-
Frequency Range Insertion Loss (Less Coupling) Isolation Amplitude Balance VSWR Phase Balance
Operating Characteristics
Impedance Input Power Environmental MIL-STD-202 screening available. Pin Configuration A; P1, B; P2, D; P3, C; P4 Case ground 50 Ohms Nominal 0.5 Watts Max
- All specifications apply with 50 ohm source and load impedance.
- - Differences measure between C & D feeding A or B.
Ordering Information
Part Number HH-105 PIN Package TO-5-2
Functional Diagram
180° 180° A A HYBRID MAGIC TEE 0° 0 °
0° 0 °
B 0° 0°
M/A- Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020
.ma.
AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.
7-10
Hybrid Junction 20
- 30 MHz
V2.00
Typical Performance
INSERTION LOSS
TOTAL TRANSMISSION LOSS (d B)
1.0 4.0
LOSS (d B)
PORTS A-C, A-D, B-C, B-D
0.0 10 20 50 100 200 300 400
3.0...
