K10 Datasheet | Tyco Electronics

Features - K10 - DPDT contact arrangement standard. - AC and DC coils. - Mounting options include socket, PCB, top flange. - UL Class B coil insulation system. Coil Data DC Coils Nominal Voltage 6 12 24 48 110 120- 240- Resistance in Ohms ± 10% 40 160 650 2,600 11,000 ___ ___ Nominal Current in Milliamps 150 75 37 18.5 10 ___ ___ AC Coils Resistance in Ohms ± 15% 10.5 43 160 668 ___ 3,900 12,000 Nominal Current in Milliamps 200 100 52 26 ___ 11 6 Contact Data @ 25°C Materials: Silver-cadmium oxide. Expected Life: 10 million operations, mechanical; 100,000 operations minimum at rated loads. - For 220/240VDC operation, use 11,000 Ohm, 5 Watt dropping resistor in series with the 110VDC coil. Contact Ratings Contact Code 5 Material Silver-cadmium oxide UL/CSA Ratings 15A @ 30VDC 15A @ 120VAC 10A @ 277VAC 1/3HP @ 120VAC 1/2HP @ 250VAC Type Resistive Resistive Resistive Operate Data @ 25°C Must Operate Voltage: DC Coils: 75% of nominal voltage. AC Coils: 85% of nominal voltage. Operate Time (Excluding Bounce): 13 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): 6 milliseconds, typical, at nominal voltage. Initial Dielectric Strength Between Open Contacts: 1,000V rms. Between Adjacent Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms. Environmental Data Temperature Range: Storage: -60°C to +105°C. Operating: -45°C to +70°C. Coil Data @ 25°C .. DC Coils: .9 Watts. AC Coils: 1.2VA. Maximum Power: 2.0 Watts. Duty Cycle: Continuous. Insulation: Class B: (130°C). Nominal Power: Mechanical Data Mounting: Socket mount, printed circuit board, top flange. Termination: .187" (4.75mm) quick connect/solder terminals, or printed circuit terminals. Enclosure: Smoke-color polycarbonate dust cover. Weight: 1.8 oz. (51g) approximately. Dimensions are shown for 720 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. .tycoelectronics. Technical...