Datasheet4U Logo Datasheet4U.com

MAAMGM0003-DIE - Variable Distributed Amplifier

General Description

The MAAMGM0003-Die is a 0.4W Distributed Amplifier with on-chip bias networks and variable gain control.

This product is fully matched to 50 ohms on both the input and output.

The MMIC can be used as a broadband amplifier stage or as a driver stage in high power applications.

Key Features

  • MAAMGM0003-DIE 1.0 - 15.0 GHz GaAs MMIC Amplifier 1.0 to 15.0 GHz Operation 0.4 Watt Saturated Output Power Level Variable Gain Control Select at Test Biasing Variable Drain Voltage (5-8V) Operation Self-Aligned MSAG® MESFET Process Primary.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAAM-007239 Broadband CATV Single Ended 3-Way Active Splitter MA-COM
MAAM-007805 Broadband CATV Single Ended 2-Way Active Splitter MACOM
MAAM-007807 Broadband CATV Amplifier MACOM
MAAM-007866-0P1R00 Broadband Driver Amplifier MACOM
MAAM-008200 Cascadable Amplifier MA-COM

Other Datasheets by Tyco Electronics (now TE Connectivity)

Part Number Description
MAAMGM0002 Amplifier
MAAMGM0002-DIE Amplifier
MAAMGM0007-DIE Distributed Amp/Gain Block
MAAM-000056 RF Driver Amplifier
MAAM-000057 RF Driver Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RO-P-DS-3046 - - www.DataSheet4U.com 0.4W Variable Distributed Amplifier 1.0 – 15.0 GHz Preliminary Information Features ♦ ♦ ♦ ♦ ♦ ♦ MAAMGM0003-DIE 1.0 - 15.0 GHz GaAs MMIC Amplifier 1.0 to 15.0 GHz Operation 0.4 Watt Saturated Output Power Level Variable Gain Control Select at Test Biasing Variable Drain Voltage (5-8V) Operation Self-Aligned MSAG® MESFET Process Primary Applications ♦ EW ♦ Radar Description The MAAMGM0003-Die is a 0.4W Distributed Amplifier with on-chip bias networks and variable gain control. This product is fully matched to 50 ohms on both the input and output. The MMIC can be used as a broadband amplifier stage or as a driver stage in high power applications. Each device is 100% RF tested on wafer to ensure performance compliance.