MAAMSS0014 Datasheet | Tyco Electronics

Features - - - - Low Cost Plastic SOT-89 Package Broadband Operation 18 d Bm Pout at - 50 d Bc ACPR 24 d Bm P1d B MAAMSS0014 V3 Functional Schematic Description M/A-’s MAAMSS0014 RF driver amplifier is a Ga As MMIC which exhibits excellent ACPR performance as well as high gain and low power consumption in a low-cost SOT-89 surface mount plastic package. The MAAMSS0014 employs a monolithic single stage design featuring a convenient 50-ohm input/ output impedance. This device runs off a single +5 volt supply and draws 110 m A typically. The design provides excellent performance from 500 to 2400 MHz. The MAAMSS0014 is fabricated using M/A-’s i HBT process to realize low current and high power functionality. The process features full passivation .. for increased performance and reliability. Pin 1 RF In RF Out Pin Configuration Pin No. 1 2 Function RF In GND Pin No. Function RF Out/Bias Absolute Maximum Ratings1,2 Parameter Absolute Maximum Ordering Information Part Number MAAMSS00014SMB-01 MAAMSS00014SMB-02 MAAMSS0014TR MAAMSS0014TR-3000 Package 900 MHz Standard Sample Kit 1900 MHz Standard Sample Kit 1000 Piece Tape and Reel- 3000 Piece Tape and Reel- RF Input Power 500 MHz 900 MHz 1900 MHz Voltage 0 d Bm 2 d Bm 4 d Bm 6.0 volts -40 °C to +85 °C -65 °C to +150 °C Operating Temperature Storage Temperature - Reference Application Note M513 for reel size information. 1. Exceeding any one or bination of these limits may cause permanent damage to this device. 2. The MAAMSS0014 is designed to operate optimally at 10 d B backed off from its output P1d B of 24 d Bm. Driving the device at higher power levels could degrade performance. Sample Board Layout M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A- makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A- assume any liability whatsoever arising out of the...