Datasheet4U Logo Datasheet4U.com

MDC-179 - Termination Insensitive Mixer

General Description

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle.

This allows for higher power level performance with minimum distortion.

Key Features

  • n Intermodulation Ratio is Insensitive to Port Mismatches n VSWR:.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MDC-179 Termination Insensitive Mixer MACOM
MDC-158 Termination Insensitive Mixer MA-COM
MDC-169 Termination Insensitive Mixer MACOM
MDC-169SMA Termination Insensitive Mixer Tyco
MDC-21 Switch and Shield PDI

Other Datasheets by Tyco Electronics (now TE Connectivity)

Part Number Description
MDC-162 Termination-Insensitive Mixer
MDC-163 Termination-Insensitive Biasable Mixer
MDC-164 Termination-Insensitive Mixer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Termination Insensitive Mixer, 1 - 4000 MHz Features n Intermodulation Ratio is Insensitive to Port Mismatches n VSWR: <2.0:1 Typical Midband n Isolation: 35 dB Typical Midband n Impedance: 50 Ohms Nominal n Maximum Input Power: 350 mW Max @ 25°C, Derated n n V 3.00 MD-/MDC-179 FP-2 (MD-179) to 85°C @ 3.2 mW/°C LO Power: +24 dBm Max. MIL-STD-883 Screening Available Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms.