PF03
PF03 is 40-860 MHz. Ultra-linear Opto Receiver Amplifier manufactured by Tyco Electronics.
Features
Ultra High Linearity with Low Noise
40-860 MHz.
Ultra-linear Opto Receiver Amplifier
Independent DC Supply pin for Optical diode (PFO4 Model)
Available connectors & applicable dash #’s
FC/APC
- FCAPC SC/APC
- SCAPC FC/PC
- FCPC ST
- ST Unit without a connector has no dash number
Electrical Specifications @ Tcase =30°C
Pa r a me t e r Frequency Range Responsivity (Rλ) O ptical Wavelength (λ) Spectral Density Gain Flatness (peak to valley)
(Referenced to 75 ohms)
Typica l Condit ions M in. Va lue 40 M a x. Va lue 860 Unit s MHz. V/W 1600 nm. A/W A/W 1.0 40 16 80 70 0.8 7. 0 240 d B. d B. d B. d Bc. d Bc. V/m W. p A/√Ηz. m A.
λ= 1300nm.
800 1290
λ =1310 ±20nm. λ =1550 ±20nm. f=40MHz To 860MHz. @ λ=1300 with SC/APC and FC/APC Connectors f= 40 To 860MHz. f1= 326.25MHz, f2= 333.25MHz., f3= 335.25MHz. P1,2,3=0.33mw. f4 =f1+f2- f3=324.25MHz= meas. freq. P1,2,=0.50mw. f3 =f1+f2=324.25MHz.= meas. frequency
0.85 0.90
O ptical Input Return Loss O utput Return Loss Referenced to 75 ohms 3rd O rder Intermods (IMD3)
(Two laser test)Pin #1=1.0v (Two laser test)Pin #1= 1.0v
2nd O rder Intermods (IMD2) f1= 135MHz, f2= 189.25MHz., O ptical Power Monitor Voltage @ Pin #1) Equivalent Input N oise (Ein) Total Current (ITOT)
Pin #1 internally connected to a 10K Ω series R to measure photo diode current across a 1K Ω to ground f1=40MHz. @Voltage of +24v
Outline Drawings
Maximum Ratings
Storage Temperature -40°C to +85°C DC Voltage +28 volts Optical Input Power +10 d Bm. Operating Base Temperature -20 to +85°C Fiber Bending Radius 1.3” min. Fiber Pull Strength 0.5kgrams
Pin Configuration
Pin # Description
1 monitor current 2,3,7,8 Ground 4 (PFO4 only) . Optical diode detector +V 5 RF Amplifier +V 6 not used...
