SMPA2010
SMPA2010 is 200 TO 2000 MHz TO-8 CASCADABLE AMPLIFIER manufactured by Tyco Electronics.
PA2010/SMPA2010
200 TO 2000 MHz TO-8 CASCADABLE AMPLIFIER
- HIGH POWER OUTPUT: +25.5 d Bm (TYP.)
- HIGH THIRD ORDER IP3: +33 d Bm (TYP.)
- MODERATE NOISE FIGURE: 5.0 d B (TYP.)
- LOW VSWR: 1.5:1 (TYP.)
Specifications (Rev. Date: 2/02)-
Characteristics Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Figure (max.) Power Output @ 1 d B p. (min.) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max.) DC Current @ 15 Volts (max.) Typical
0° to 50°C
Typical Performance @ 25°C
Guaranteed
-54° to +85°C
0.2-2.4 GHz 10.0 d B ±0.3 d B 20 d B 5.0 d B 25.5 d Bm +33 d Bm +50 d Bm +55 d Bm 1.8:1 / 1.5:1 179 m A
0.2-2.0 GHz 9.0 d B ±0.7 d B
6.5 d B 23.5 d Bm
0.2-2.0 GHz 8.5 d B ±1.0 d B 7.0 d B 23.0 d Bm
1.9:1 / 1.7:1 187 m A
2.0:1 / 1.8:1 189 m A
- CPA2010 is a standard PA2010 installed in an SMA connectorized housing and is guaranteed over 0°C to 50°C with the PA2010's specifications limits of -54°C to+85°C. Measured in a 50-ohm system at +15 Vdc Nominal. Subject to change without notice.
Absolute Maximum Ratings
Storage Temperature Max. Case Temperature Max. DC Voltage Max. Continuous RF Input Power Max. Short Term RF Input Power (1 minute max.) Max. Peak Power (3 µsec max.) “S” Series Burn-in Temperature (Case)
-62° to +150°C 85°C +17 Volts +17 d Bm 100 m W 0.5 W 85°C
Thermal Data: Vcc = 15 Vdc
Thermal Resistance θjc Transistor Power Dissipation Pd Junction Temperature Rise Above Case Tjc
50°C/W 1.25 W 63°C
Outline Drawings
Package Figure Model TO-8 BG PA2010 Surface Mount AA SMPA2010 SMA Connectorized CE CPA2010
Specifications subject to change without notice.
- North America: 1-800-366-2266 Visit .ma. for plete contact and product...
