SSRM Datasheet | Tyco Electronics

Features - - - - - - - - DIN mount design with integral heatsink. Choice of 45, 55 or 65A rms inverse-parallel connected SCR output. 48 - 660VAC output. 4 -32VDC or 90 - 140Vrms input control. 4,000V rms optical isolation. Green LED input status indicator. Finger-safe (IP20) screw clamp terminals for load and control. Ground terminal. Engineering Data Form: 1 Form A (SPST-NO). Duty: Continuous. Isolation: 4,000V rms input-to-output-to-ground. Insulation Resistance: 109 Ohms, minimum, at 500VDC. Capacitance: 8.0 pf maximum (input to output). Temperature Range: Storage: - 40°C to +125°C Operating: - 40°C to + 80°C Case and Mounting: Refer to outline dimension drawing. Termination: Control: Finger safe (IP20) screw clamps accepting wire size up to #12 AWG (2.5 mm). Load: Finger safe (IP20) screw clamps accepting wire size up to #8 AWG (3.8 mm). Ground: #10 screw with 5/16 in. hex/slottted head. Installation Spacing: Minimum 0.8 in (20 mm) space between units. Approximate Weight: 16.9 oz. (479 g). Ordering Information Sample Part Number 1. Basic Series: SSRM = Solid State Relay with Integral Heatsink for DIN Rail Mounting 2. Line Voltage: 600 = 48 - 660 VAC 3. Input Type & Voltage: A = 90 - 140VAC D = 4 - 32VDC 4. Maximum Switching Rating/Output: 45 = 45.0A rms 55 = 55.0A rms 65 = 65.0A rms -600 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRM-600A45 SSRM-600D45 SSRM-600A55 SSRM-600D55 SSRM-600A65 SSRM-600D65 Input Specifications Parameter Control Voltage Range V IN Reverse Voltage V IN (Max.) Must Operate Voltage VIN(OP) (Min.) Must Release Voltage V IN(REL) (Min.) Input Current (Typ.) Input Current (Max.) Issued 4-09 .tycoelectronics. Conditions @ 25°C @ 25°C @ 25°C @ 25°C @ 25°C @ 25°C Dimensions are in inches over (millimeters) unless otherwise specified. AC Control Units 90 - 140 Vrms - 90 Vrms 10 Vrms 15 m A @ 120 Vrms - Dimensions are shown for reference purposes only. Specifications...