SW-276 Datasheet | Tyco Electronics

High Power Ga As SPDT Switch DC - 3 GHz Features q SW-106, SW-276 V 2.00 SW-106 (CR-5) q q q q +39 d Bm Typ. 1 d B pression Point, -8V Control +65 d Bm Typ. 3rd Order Intercept, -8V Control Insertion Loss of 0.4 d B Typical Low Power Consumption Fast Switching Speed - 3.0 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz (- 55°C to +85°C) SW-106 SW-276 0.5 d B 0.6 d B 0.8 d B 1.2 d B 34 d B 32 d B 20 d B 15 d B 1.3:1 1.5:1 1.5:1 1.6:1 0.4 d B Max 0.5 d B Max 0.7 d B Max 1.0 d B Max 37 d B Min 31 d B Min 24 d B Min 19 d B Min 1.3:1 Max 1.5:1 Max 1.5:1 Max .. 1.6:1 Max Guaranteed Specifications1 Frequency Range Insertion Loss Isolation VSWR Operating Characteristics2 Impedance Switching Characteristics Trise, Tfall (10% to 90% ) Ton, Toff (50% CTL to 90%/10% RF) Transients (In-Band) Input Power for pression 0.9 GHz (-5VControl) 0.9 GHz (-8V Control) 0.1 d B +32.5 d Bm +35.5 d Bm 50 Ohms Nominal 30 ns Typ 35 ns Typ 12 m V Typ 1.0 d B +35.5 d Bm +39.5 d Bm Typ Typ SW-276 (CR-2) Third Order Intercept Point (with two +10 d Bm Input Tones) 0.9 GHz (-5V Control) +61 d Bm Typ 0.9 GHz (-8V Control) +65 d Bm Typ Control Voltages Vin Low Vin High 0 to -0.2V @ 20 µA Max -5V @ 50 µA Typ to -10V @ 800 µA Max 1. All specifications apply when operated with bias voltages of 0V for Vin Low and -5 to -10V for Vin High, and 50 ohm impedance at all RFports, unless otherwise specified. 2. High power (greater than 1W) handling specifications apply to cold switching only. For input powers under 1W hot switching can be used. 3. Contact the factory for standard or custom screening requirements. Ordering...