SW-283 Datasheet | Tyco Electronics

Ga As Transfer Switch DC - 3 GHz Features q q q V3.00 CR-4 Small Ceramic Package, 0.250" Sq Fast Switching Speed, 4 ns Typical Ultra Low DC Power Consumption (From -55°C to +85°C) PIN 1 2 0.250 SQ (6.35) 3 4 12 11 10 9 Guaranteed Specifications- Frequency Range Insertion Loss DC-3 GHz DC-2 GHz DC-1 GHz DC-0.5 GHz VSWR DC-3 GHz DC-2 GHz DC-1 GHz DC-0.5 GHz Isolation DC-3 GHz DC-2 GHz DC-1 GHz DC-0.5 GHz - 3 GHz 2.1 d B Max 1.8 d B Max 1.3 d B Max 1.0 d B Max 1.9:1 Max 1.7:1 Max 1.3:1 Max 1.25:1 Max 20 d B Min 25 d B Min 40 d B Min 45 d B Min 0.050 TYP (1.27) 0.050 TYP (1.27) 0.075 MAX (1.91) 0.025 (0.64) ORIENTATION TAB 5 6 7 8 .015 ± .003 TYP (0.38 ± 0.08) .005 ± .002 (0.13 ± 0.05) 0.100 MIN (2.54) TYP Operating Characteristics .. Impedance 50 Ohms Nominal Switching Characteristics† trise, tfall (10/90% or 90/10% RF) 2 ns Typ ton, toff (50% control to 90/10% RF) 4 ns Typ Transients (In-Band) 30 m V Typ Input Power for 1 d B pression Control Voltages (Vdc) 0/-5 0/-8 0.5-3 GHz +27 +33 d Bm Typ 0.05 GHz +21 +26 d Bm Typ Intermodulation Intercept Point (for two-tone input power up to +5 d Bm) Intercept Points IP2 IP3 0.5-3 GHz +68 +50 d Bm Typ 0.05 GHz +62 +45 d Bm Typ Control Voltages (plementary Logic) VIN Low 0 to -0.2V @ 5 µA Max VIN Hi -5V @ 10 µA Typ to -8V @ 200 µA Max Environmental MIL-STD-883 screening available. Bottom of case is AC ground. Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) Ordering Information Model No. SW-283 PIN Package Ceramic - All specifications apply with 50 ohm impedance connected to all RF ports with 0 and -5 Vdc control voltages. † Faster switching speed can be achieved with enhanced driver waveform. Specifications Subject to Change Without Notice. M/A-, Inc. North America: Tel. (800) 366-2266 Fax (800) 618-8883 s Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 s Europe: Tel. +44 (1344) 869 595 Fax +44 (1344)...