SW-419 Datasheet | Tyco Electronics

.. Ga As SP4T Terminated Switch DC - 2 GHz Features q q q q q q q q SO-24 Very Low Power Consumption: 100 µW Low Insertion Loss: 1 d B High Isolation: 25 d B up to 2 GHz Very High Intercept Point: 46 d Bm IP3 Nanosecond Switching Speed Temperature Range: -40˚C to +85˚C Low Cost SOIC24 Plastic Package Tape and Reel Packaging Available1 Description M/A-’s SW-419 is a Ga As MMIC SP4T terminated switch in a low cost SOIC 24-lead wide body surface mount plastic package. The SW-419 is ideally suited for use where very low power consumption is required. Typical applications include switch matrices, and filter banks in systems such as: radio and cellular equipment, PCM, GPS, fiber optic modules, and other battery powered radio equipment. The SW-419 is fabricated with a monolithic Ga As MMIC using a mature 1-micron process. The process Features full chip passivation for increased performance and reliability. Ordering Information Part No. Package SOIC 24-Lead Plastic Package Forward Tape & Reel Reverse Tape & Reel Unit d B d B d B d B d B d B d B d B Min. Typ. 0.8 0.8 0.9 1.2 60 51 39 24 1.3:1 1.3:1 8 16 15 21 27 45 60 35 46 Max 1.0 1.1 1.2 1.4 SW-419 PIN SW-419 TR SW-419 RTR Electrical Specifications, TA = +25°C Parameter Insertion Loss Test Conditions2 Isolation - 0.1 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 0.1 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz On Off 10% to 90% RF, 90% to 10% RF 50% Control to 90% RF, 50% Control to 10% RF In Band Input Power 0.05 GHz Input Power 0.5 - 2.0 GHz Measured Relative 0.05 GHz to Input Power 0.5 - 2.0 GHz (for two-tone input power up to +5 d Bm) Measured Relative 0.05 GHz to Input Power 0.5 - 2.0 GHz (for two-tone input power up to +5 d Bm) 54 46 36 20 VSWR Trise, Tfall Ton, Toff Transients One d B pression IP2 n S n S m V d Bm d Bm d Bm d Bm d Bm d Bm IP3 1. Refer to “Tape and Reel Packaging” Section, or contact factory. 2. All measurements with 0, -5 V control voltages at 1 GHz in a 50Ω system, unless...