SW65-0014 Datasheet | Tyco Electronics

.. Ga As SPST Absorptive Switch with ASIC Driver, DC - 3.0 GHz Features n n n n n n n n V 5.00 SOW-24 Typical Isolation: 42 d B (2,000 MHz) Typical Insertion Loss: 1.8 d B (2,000 MHz) Integral ASIC TTL/CMOS Driver Plastic, 50 mil Pitch, SOW-24 Lead, Wide Body Low DC Power Consumption 50 Ohm Nominal Impedance Tape and Reel Packaging Available Test Boards Available Description M/A-'s SW65-0014 is a Ga As MMIC absorptive SPST switch with an integral silicon ASIC driver. This device is in a 24-lead plastic package. This switch offers excellent broadband performance and repeatability from DC to 3 GHz, while maintaining low DC power dissipation. The SW65-0014 is ideally suited for wireless infrastructure applications. Also available in ceramic package with improved performance. Package outline conforms to JEDEC standard MS-013AD. Electrical Specifications: TA = 25°C Parameter Insertion Loss Isolation (All arms off) VSWR Trise Tfall Ton Toff Transients 1 d B pression Input IP3 VCC VEE ICC IEE Logic “0” Logic “1” Test Conditions DC - 3.0 GHz DC - 3.0 GHz Units d B d B Min - 35 On 1.6:1 15 50 50 +20 +27 +35 +46 +5.0 -5.0 - - - - Typical 1.8 42 Off 2.0:1 Max 2.2 - DC - 3.0 GHz 10%/90%, 90%/10% 1 50% TTL to 90%/10% RF In-band (peak to peak) .05 GHz .5 - 3.0 GHz Two tone inputs 0.05 GHz Up to +5 d Bm 0.5 - 3.0 GHz - - VCC = +5.0V VEE = -5.0V Iin = 20 µA max Iin = 20 µA max - n S n S m V d Bm d Bm d Bm d Bm V V m A m A V V - - - - - - - - +4.5 -8.0 - - 0.0 2.0 2.1:1 50 150 150 - -...