SW90-0002 Datasheet | Tyco Electronics

.. Ga As SPDT Switch, Absorptive, Single Supply, DC - 4 GHz Features CSP-1 V 3.00 SW90-0002 n n n n n n n Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Leadless 4 x 6 mm Chip Scale Plastic Package Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel are Available Description M/A-'s SW90-0002 is a SPDT absorptive p HEMT switch with integral TTL driver. This device is in an MLP plastic surface mount package. This switch offers excellent broadband performance and repeatability from DC to 4 GHz, while maintaining low DC power dissipation. The SW90-0002 is ideally suited for wireless infrastructure applications. Electrical Specifications: TA = 25°C Parameter Insertion Loss Isolation VSWR VSWR 1 d B pression Input IP3 Switching Speed Test Conditions RFC- RF1,RF2 (Logic per truth table) RF1- RF2 (All Logic “0”) On (RFC,RF1, RF2) (Logic per truth table) Off (RF1, RF2) (Logic per truth table) - - Two-tone inputs up to +5 d Bm Ton (50% Control to 10% RF) Toff (50% Control to 90% RF) Trise (10% to 90% RF) Tfall (90% to 10% RF) Vcc Logic “0” Logic “1” Icc - Sink Current is 20 µA max. Source Current is 20 µA max. Vcc min to max, Logic “0” or “1” - - - - Frequency DC - 4.0 GHz DC - 4.0 GHz DC - 4.0 GHz DC - 4.0 GHz 50 MHz 0.5 - 4.0 GHz 50 MHz 0.5 - 4.0 GHz Units d B d B Ratio Ratio d Bm d Bm d Bm d Bm n S n S n S n S V V V m A Min. - 30 - - - - - - - - - - 4.5 0.0 2.0 -...