Datasheet4U Logo Datasheet4U.com

MAAPSM0015 - DC-20 GHz GaAs MMIC Amplifier

General Description

The M/A-COM MAAPSM0015 is a medium power wideband AGC amplifier that typically provides 11 dB of gain with 25 dB of AGC range.

The circuit topology is a six-section traveling wave amplifier using common source FETs which provide very wide bandwidth.

Typical input and output return loss is 12 dB.

Key Features

  • ¢ ¢ ¢ ¢ ¢ ¢ ¢ DC-20 GHz GaAs MMIC Amplifier Wide Frequency Range: DC-20 GHz On Chip Bias Network High Gain : 11 dB Gain Flatness: + 0.75 dB Typical Psat: 21 dBm Return Loss: 12 dB Low Bias Current : 100mA 2.0 mm.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAAPSS0066 WDCT Power Amplifier Tyco Electronics
MAAPSS0071 DECT Power Amplifier Tyco Electronics
MAAPSS0075 Linear Power Amplifier Tyco Electronics
MAAPSS0076 DECT Power Amplifier Tyco Electronics
MAAPSS0093 RF Power Amplifier IC Tyco Electronics

Other Datasheets by Tyco Electronics (now TE Connectivity)

Part Number Description
MAAPSM0008 1-Watt Power Amplifier 5 - 6 GHz
MAAPSS0003 PCS TDMA/CDMA Power Amplifier 1750 - 1910 MHz
MAAPSS0006 Cellular CDMA/AMPS Power Amplifier 824 - 849 MHz
MAALSS0012 Miniature Broadband Gain Stage 200 - 3000 MHz
MAALSS0012-3000 Miniature Broadband Gain Stage 200 - 3000 MHz

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DC-20 GHz GaAs MMIC Amplifier Preliminary Rev. 2.0 MAAPSM0015 Features ¢ ¢ ¢ ¢ ¢ ¢ ¢ DC-20 GHz GaAs MMIC Amplifier Wide Frequency Range: DC-20 GHz On Chip Bias Network High Gain : 11 dB Gain Flatness: + 0.75 dB Typical Psat: 21 dBm Return Loss: 12 dB Low Bias Current : 100mA 2.0 mm Description The M/A-COM MAAPSM0015 is a medium power wideband AGC amplifier that typically provides 11 dB of gain with 25 dB of AGC range. The circuit topology is a six-section traveling wave amplifier using common source FETs which provide very wide bandwidth. Typical input and output return loss is 12 dB. RF ports are DC coupled, enabling the user to customize system corner frequencies. DC bias can be provided through the drain termination resistor without the need for an external bias inductor.