Datasheet4U Logo Datasheet4U.com

MD-156 - Flatpack Double-Balanced Mixer

General Description

Transformers convert to the LO and RF paths to balanced lines connecting a low barrier, Schottky diode ring quad.

These transformers help provide excellent isolation between ports.

Conversion loss is low.

Key Features

  • Noise Figure: 6.5 Typical LO-RF Isolation: 30 dB Typical Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW max. @ 25°C, Derated to 85°C @ 3.2 mW/°C n IF Port Current: 50 mA Max. n MIL-STD-883 Screening Available n n n n FP-2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MD-158 Termination Insensitive Mixer MA-COM
MD-108 Double-Balanced Mixer MA-COM
MD-123 Double-Balanced Mixer MA-COM
MD-124 Double-Balanced Mixer MA-COM
MD-140 Double-Balanced Mixer MA-COM

Other Datasheets by Tyco Electronics (now TE Connectivity)

Part Number Description
MD-158 Double-Balanced Mixer
MD-113 High Performance Double-Balanced Mixer
MD-124 Double-Balanced Mixer
MD-169 Termination Insensitive Mixer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Flatpack Double-Balanced Mixer, 0.6 - 3 GHz V 3.00 MD-156 Features Noise Figure: 6.5 Typical LO-RF Isolation: 30 dB Typical Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW max. @ 25°C, Derated to 85°C @ 3.2 mW/°C n IF Port Current: 50 mA Max. n MIL-STD-883 Screening Available n n n n FP-2 Description Transformers convert to the LO and RF paths to balanced lines connecting a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Pin Configuration Pin No. 1 2 3 4 Function GND GND GND IF Pin No.