MH005 Datasheet | Tyco Electronics

Features .. Small size: 50.8 mm x 27.9 mm x 11.7 mm (2.00 in. x 1.10 in. x 0.46 in.) Wide 3:1 input range Operating ambient temperature range: - 10 °C to +70 °C, no derating High reliability High efficiency: 73% typical Input-to-output isolation No external filtering required No heat sink required Overcurrent protection Output overvoltage protection PC board mountable I I I I I The MH005-Series Power Modules use advanced, surfacemount technology and deliver high-quality, pact, dc-dc conversion at an economical price. Applications UL- 1950 Recognized, CSA† C22.2 No. 950-95 Certified, VDE‡ 0805 (EN60950, IEC950) Licensed Meets FCC Class A requirements Distributed power architectures munication equipment puter equipment - UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. ‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V. Options Long pins: 5.8 mm ± 0.5 mm (0.230 in. ± 0.020 in.) Metal case with case ground pin Description The MH005-Series Power Modules are dc-dc converters that operate over an input voltage range of 4.5 Vdc to 14 Vdc and provide precisely regulated dc outputs. The outputs are isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings of 5 W with a typical full-load efficiency of 73%. The modules are PC board mountable and encapsulated in nonconductive cases. The modules are rated to full load at 100 °C case temperature with no external filtering or heat sinking. MH005-Series Power Modules: 4.5 Vdc to 14 Vdc Input; 5 W Data Sheet December 1999 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data...