V23086-C1001-A303
Overview
- 30A, 16VDC switching rating.
- 40A inrush at 16VDC.
- 20A continuous contact rating @ 85°C.
- Immersion cleanable plastic case with knock-off nib for ventilation.
- 60% less volume than other comparable power relays.
- 1 Form A and 1 Form C arrangements in single and dual relay packages.
- Choice of AgNi 0.15 or AgSnO contacts. Operate Data Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 3 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.) Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, 29.5 ± 1.0" Hg.) unless otherwise noted. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT) in single relay and dual relay configurations. Material: AgNi 0.15 - Recommended for inductive loads. AgSnO - Recommended for high inrush, lamp and capacitive loads and applications prone to contact material transfer. Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Load Current (@ 14VDC Load Voltage): Load Form A (NO) Form C NO NC Max. Continuous Current Max. Break Current Max. Make Current AgSnO AgNi 0.15 30A 30A 100A 40A 30A 30A 100A 40A 25A 25A 15A 10A Max. Switching Power: 35-320 watts DC (voltage dependent). Min. Recommended Current: 0.5 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 10 amp contact load. 250 millivolts, maximum, for normally closed contacts @ 5 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 20 amps, 14VDC, resistive load on normally open contact. Initial Dielectric Strength B
