RB1-125BAG1A Datasheet | UDE

Description ： RJ45 1X1 Tab Down Through Hole 10/100Base-T Contact Area : Gold Flash LED:L-Green; R-Yellow Approved Spec No. Update Date RB1111-00 2009/8/27 Checked Prepared Spec No. : RB1111-00 1. MECHANICAL DIMENSION 1.1 Product Dimension General Tolerance X.X : ± 0.25 : X.XX : ± 0.13 X.XXX : ± 0.08 -1- .ude-corp. Spec No. : RB1111-00 1.2 Remened PCB Layout ponent Side of Board All dimension tolerance are ±0.05mm unless otherwise specified -2- .ude-corp. Spec No. : RB1111-00 1.3 Standard RJ45 Plug Specification - All dimensions follow : FCC subpart F, 68,500, Figure (C)(2)(i) & (C)(2)(ii) & (C)(3)(i) IEC 60603-7 - All plugs must be meeting the requirements of plug Go & No-Go gauge. Gauge follow : FCC subpart F, 68,500, Figure (C)(4)(i) & (C)(5)(i) - There must be no damage to Housing and Locking Latch. - There must be no nicks and cuts in cable. - Durability : 750 cycles generally -3- .ude-corp. Spec No. : RB1111-00 2. REQUIREMENTS 2.1 Design and Construction Product shall be of design, construction and physical dimensions specified on applicable. 2.2 Material 2.2.1 Terminal Parts (Underplating : 30μ" min. Nickel overall) 2.2.1.1 RJ Terminal : PH. Bronze, Thickness=0.30mm Finish : Contact Area :Gold Flash 2.2.1.2 Input Terminal : Brass, Thickness=0.35mm Finish : 100μ" min. Tin 2.2.1.3 Case Terminal : Brass, Thickness=0.30mm Finish : 100μ" min. Tin 2.2.2 Plastic Parts <UL94V-0> 2.2.2.1 Housing : High Temperature Thermoplastic, Black 2.2.2.2 Case : High Temperature Thermoplastic, Black 2.2.3 Shield Parts : Stainless, Thickness=0.20mm, Pre-soldering -4- .ude-corp. Spec No. : RB1111-00 2.3 Operating and Storage...