TP5.0SMDJ15CA Datasheet | UN Semiconductor

Surface Mount Transient Voltage Suppressors TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telemunications, aerospace industries, and intelligent control systems. Working Voltage: 10 to 58 V Peak Pulse Power: 5000 W - Glass passivated chip - 5000W peak pulse power capability with a 10/1000 μ s waveform, repetitive rate (duty cycle):0.01 % - High reliability application and automotive grade AEC Q101 qualified - Meet ISO 7637-2 load dump test (varied by test condition) - Low leakage - Uni and Bidirectional unit - Excellent clamping capability - Very fast response time - Ro HS pliant - Case: Molded plastic - Epoxy: UL 94V-0 rate flame retardant - Lead: Solderable per MIL-STD-750, method - Polarity: Color band denotes cathode end except Bipolar - Mounting position: Any TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Tele, puter, Industrial and Consumer electronic applications. Parameter Symbol Value Peak power dissipation with a 10/1000μs waveform(1) PPPM Power Dissipation on Infinite Heat Sink at TL=75°C Peak pulse current with a 10/1000μs waveform(1) I PP See Next Table Operating junction and storage temperature range Maximum Instantaneous Forward Voltage at 50A for Unidirectional Peak forward surge current, 8.3 ms single half sine-wave unidirectional only(2) Note: T J , T STG VF IFSM -55 to +150 3.5 300 (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25℃per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Units W W A °C V Revision July 18,...