L6142 Datasheet | Unisonic Technologies

DESCRIPTION The UTC L6142 provides new levels of performance in applications where low voltage supplies or power limitations previously made promise necessary. Operating on supplies of 2.7V to over 24V, the UTC L6142 is an excellent choice for battery operated systems, portable instrumentation and others. The greater than rail-to-rail input voltage range eliminates concern over exceeding the mon-mode voltage range. The rail-to-rail output swing provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. High gain-bandwidth with 450μA/Amplifier supply current opens new battery powered applications where previous higher power consumption reduced battery life to unacceptable levels. The ability to drive large capacitive loads without oscillating functionally removes this mon problem. - FEATURES - For 5V supply, Typ. unless noted - Rail-to-rail Input : -0.25V~5.25V - Rail-to-Rail Output : 0.005V~4.995V - Slew Rate: Small Signal, 5V/μs Large Signal, 30V/μs - Low Supply Current 450μA/Amplifier - Wide Supply Range: 2.7V~24V - Gain 108d B with RL=10k - ORDERING INFORMATION Ordering Number Lead Free Halogen Free L6142L-S08-R L6142G-S08-R Package SOP-8 Packing Tape Reel .unisonic..tw Copyright © 2022 Unisonic Technologies Co., Ltd 1 of 6 QW-R105-077.c - MARKING Preliminary LINEAR INTEGRATED CIRCUIT - PIN CONFIGURATION + + - PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 7 8 PIN NAME OUTA -INA +INA V+INB -INB OUTB V+ Output (op amp A) Inverting Input (op amp A) Non-inverting Input (op amp A) Negative Power Supply Non-inverting Input (op amp B) Inverting Input (op amp B) Output (op amp B) Positive Power Supply DESCRIPTION UNISONIC TECHNOLOGIES CO., LTD .unisonic..tw 2 of 6 QW-R105-077.c Preliminary...