Datasheet4U Logo Datasheet4U.com

LM2937 - 500mA LOW DROPOUT VOLTAGE REGULATOR

General Description

The UTC LM2937 is a positive voltage regulator capable of supplying up to 500mA of load current.

The use of a PNP power transistor provides a low dropout voltage characteristic.

Key Features

  • Fully specified for operation over -40C~ +125C.
  • Output current in excess of 500mA.
  • Output trimmed for 5% tolerance under all operating conditions.
  • Typical dropout voltage of 0.5V at full rated load current.
  • Wide output capacitor ESR range, up to 3Ω.
  • Reverse battery protection.
  • Internal short circuit and thermal overload protection.
  • 60V input transient protection.
  • Mirror image insertion protection.
  • Built-in ON/OFF control function www. unisonic.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM2937 500-mA Low Dropout Regulator Texas Instruments
LM2937-2.5 400mA and 500mA Voltage Regulators National Semiconductor
LM2937-3.3 400mA and 500mA Voltage Regulators National Semiconductor
LM293 Dual Differential Comparators Texas Instruments
LM293 Low power dual voltage comparator NXP

Other Datasheets by Unisonic Technologies

Part Number Description
LM293 DUAL DIFFERENTIAL COMPARATOR
LM2902 QUADRUPLE OPERATIONAL AMPLIFIERS
LM2904 DUAL OPERATIONAL AMPLIFIER
LM2904B DUAL OPERATIONAL AMPLIFIER
LM2940 1A LOW-DROPOUT POSITIVE VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD LM2937 LINEAR INTEGRATED CIRCUIT 500mA LOW DROPOUT VOLTAGE REGULATOR  DESCRIPTION The UTC LM2937 is a positive voltage regulator capable of supplying up to 500mA of load current. The use of a PNP power transistor provides a low dropout voltage characteristic. With a load current of 500mA the minimum input to output voltage differential required for the output to remain in regulation is typically 0.5V(1V guaranteed maximum over the full operating temperature range). Special circuitry has been incorporated to minimize the quiescent current to typically only 10mA with a full 500mA load current when the input to output voltage differential is greater than 3V. The UTC LM2937 requires an output bypass capacitor for stability.