Datasheet4U Logo Datasheet4U.com

LM318 - HIGH SPEED OPERATIONAL AMPLIFIER

General Description

The UTC LM318 is a precision, high speed, high gain operational amplifier that has been specifically designed for use in high slew rate and wide bandwidth applications.

Unlike many wideband amplifiers, the UTC LM318 is unity-gain stable since it has internal circuitry for frequency compensation.

Key Features

  • DIP-8 SOP-8.
  • Unit gain stable (internal frequency compensation).
  • 4mV typical input offset voltage.
  • 30nA typical input offset current.
  • Input bias current of 250nA (maximum).
  • 15MHz bandwidth (small signal).
  • 50V/μs slew rate (guarantee).
  • Operates voltages of ±5V to ±20V.
  • Overload protection for Input and output.
  • Same pin assignment as general-purpose op amps.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM318 Operational Amplifiers National Semiconductor
LM318-N Operational Amplifiers Texas Instruments
LM3189 LM3189 FM IF System National Semiconductor
LM318S8 High Speed Operational Amplifier Linear Technology
LM310 Voltage Follower National Semiconductor

Other Datasheets by Unisonic Technologies

Part Number Description
LM317 ADJUSTABLE VOLTAGE REGULATOR
LM317A MEDIUM CURRENT 1.2V TO 37V ADJUSTABLE VOLTAGE REGULATOR
LM317L LOW CURRENT 1.25V TO 37V ADJUSTABLE VOLTAGE REGULATOR
LM317M MEDIUM CURRENT 1.2V TO 37V ADJUSTABLE VOLTAGE REGULATOR
LM317S HIGH CURRENT 1.3V TO 37V ADJUSTABLE VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD LM318 LINEAR INTEGRATED CIRCUIT HIGH SPEED OPERATIONAL AMPLIFIER  DESCRIPTION The UTC LM318 is a precision, high speed, high gain operational amplifier that has been specifically designed for use in high slew rate and wide bandwidth applications. Unlike many wideband amplifiers, the UTC LM318 is unity-gain stable since it has internal circuitry for frequency compensation. However, external components may be added for compensation to achieve optimum performance. When used in inverting applications, feed-forward compensation can be used to achieve slew rate in excess of 150V/µs and almost double the bandwidth. For greater stability, using overcompensation with the amplifier is possible if maximum bandwidth is not needed.