Datasheet4U Logo Datasheet4U.com

LR9102A - LOW NOISE 300mA LDO REGULATOR

Download the LR9102A datasheet PDF. This datasheet also covers the LR9102 variant, as both devices belong to the same low noise 300ma ldo regulator family and are provided as variant models within a single manufacturer datasheet.

General Description

The UTC LR9102/A is a typical LDO (linear regulator) with the

Key Features

  • Ultra Supply Current: LR9102: 50µA (Typ. ) LR9102A: 90µA (Typ. ).
  • Standby Mode: 0.1µA (Typ. ).
  • Very Low Dropout Voltage: 0.12V (Typ. ) @IOUT =300mA, VOUT =2.85V.
  • Ripple Rejection: 75dB (Typ. ) @ f=1kHz,VOUT=2.85V.
  • Temperature-Drift Coefficient ±50ppm/°C (Typ. ) of Output Voltage:.
  • Well Line Regulation: 0.02%/ V (Typ. ).
  • Output Voltage Accuracy: ±1.0%.
  • Internal Fold Back Protection 50mA (Typ. ) @ short mode Circuit:.
  • CIN=COUT=1µF or more.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LR9102-UTC.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LR9101 LOW NOISE 300mA LDO REGULATOR UNISONIC TECHNOLOGIES
LR9193 CMOS LDO Regulator LRC
LR9198 CMOS LDO Regulator LRC
LR9026 16-channel constant current LED driver LRC
LR9552 GPS Module Leadtek

Other Datasheets by Unisonic Technologies

Part Number Description
LR9102 LOW NOISE 300mA LDO REGULATOR
LR9103 LOW NOISE 150mA LDO REGULATOR
LR9107 OUTPUT CAPACITOR-LESS LOW VOLTAGE 200mA LDO REGULATOR
LR9113 LOW NOISE 300mA LDO REGULATOR
LR9113D LOW NOISE 300mA LDO REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD LR9102/A LOW NOISE 300mA LDO REGULATOR 3 CMOS IC 4 5  DESCRIPTION The UTC LR9102/A is a typical LDO (linear regulator) with the features of high output voltage accuracy, low supply current, low ON-resistance, and high ripple rejection. During operation of the UTC LR9102/A, the dropout voltage is very low and the response of line transient and load transient are very well. Internally, there’re many functions of UTC LR9102/A which can be seen in the block figure. There are a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit in each UTC LR9102/A, with auto discharge function at off state.