Datasheet4U Logo Datasheet4U.com

PA3202 - 2W STEREO AUDIO POWER AMPLIFIER

General Description

The UTC PA3202 is a monolithic integrated circuit that stereo bridged audio power amplifiers capable of producing 2 W into 3Ω with a 5V supply voltage or 800mW into 3Ω with a 3.3V supply voltage .The UTC PA3202 simplifies design and frees up board space for other

Key Features

  • br>.
  • Improves depop circuitry to eliminate turn-on and turn-off transients in output.
  • Output power: -2W(typ. )@5V into 3Ω with 0.2% THD+N max (1kHz) -800mW(typ. )@3.3V into 3Ω with 0.2% THD+N max (1kHz).
  • Fully specified for use with 3-Ω Loads.
  • Stereo switchable bridged/single-ended power amplifiers.
  • Input MUX select terminal.
  • Thermal-shutdown protection.
  • Shutdown mode available.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PA3207NL CURRENT SENSOR Pulse
PA3288.121HL SMT Power Inductor Pulse
PA3288.151HL SMT Power Inductor Pulse
PA3288.221HL SMT Power Inductor Pulse
PA3288.281HL SMT Power Inductor Pulse

Other Datasheets by Unisonic Technologies

Part Number Description
PA3211 HIGH-SLEW-RATE OP AMP
PA3212 2.6W STEREO AUDIO AMPLIFIER
PA309 HIGH GAIN AND HIGH IMPEDANCE PRE-AMPLIFIER
PA3138 DIRECT HEADPHONE DRIVER
PA3332G 2.6W STEREO AUDIO AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD PA3202 2-W STEREO AUDIO POWER AMPLIFIER WITH MUTE  DESCRIPTION The UTC PA3202 is a monolithic integrated circuit that stereo bridged audio power amplifiers capable of producing 2 W into 3Ω with a 5V supply voltage or 800mW into 3Ω with a 3.3V supply voltage .The UTC PA3202 simplifies design and frees up board space for other features. Both of the depop circuitry and the thermal shutdown protection circuitry are integrated in UTC PA3202, that reduce clicks and pops noise during power up or shutdown mode operation. A MUX control terminal (HP / LINE) allows selection between the two sets of stereo input signals.