Datasheet4U Logo Datasheet4U.com

RCT02 - Encoder

Datasheet Summary

Description

The chip can be used with the decoder UTC RCR02 to provide a complete control functions to the remote-controlled toy.

The UTC RCT02 has five input pins corresponding with the five function buttons i.e, forward, backward, rightward, leftward and turbo.

Features

  • Five input pins used for five control buttons.
  • Operating power-supply voltage range: 2.5 ~ 5.0V.
  • Auto-power-off if no press on any button in 4 minutes or continuously press on any button over 4 minutes.
  • Manual-power-on/off with ON/OFF button.
  • One output pin used for external power control.
  • Press on any button as wake up.
  • On-chip oscillator with an external resistor.
  • Low operating current.
  • Few external components needed.

📥 Download Datasheet

Datasheet preview – RCT02

Datasheet Details

Part number RCT02
Manufacturer UTC
File Size 259.49 KB
Description Encoder
Datasheet download datasheet RCT02 Datasheet
Additional preview pages of the RCT02 datasheet.

📁 Similar Datasheet

  • RCT-1800 - AC Current Sensor (Magnelab)
  • RCT-433-AS - Suface Mount 433.92 MHz SAW-Stabilized OOK Transmitter (Radiotronix)
  • RCT-433-AS - Low-Cost SAW-stabilized surface mount OOK RF transmitter (Radiotronix)
  • RCT-433-ASB - Low-Cost SAW-stabilized surface mount OOK RF transmitter (Radiotronix)
  • RCT-433-UTR - Ultra-Tiny Transmitter (Radiotronix)
Other Datasheets by UTC

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD RCT02 ENCODER FOR REMOTE CONTROLLER WITH FIVE FUNCTIONS CMOS IC  DESCRIPTION DIP-14 The chip can be used with the decoder UTC RCR02 to provide a complete control functions to the remote-controlled toy. The UTC RCT02 has five input pins corresponding with the five function buttons i.e, forward, backward, rightward, leftward and turbo. The encoding circuit in the UTC RCT02 sends digital codes to the two output pins SO and SC. The digital codes correspond to the definite function buttons or their combinations. The SO and SC outputs are used in wireless and infra-red applications respectively. SOP-14 There is an internal oscillator in the UTC RCT02. By adding an external resistor conveniently, the oscillator will be constructed.
Published: |