Datasheet4U Logo Datasheet4U.com

TL5001 - Pulse-Width-Modulation Controller

Datasheet Summary

Description

The UTC TL5001 incorporates on a single monolithic chip all the functions required for a pulse width modulation (PWM) control circuit.

Features

  • S.
  • Complete PWM power control.
  • 3.6-V to 40-V operation.
  • Internal under voltage-lockout circuit.
  • Internal short-circuit protection.
  • Oscillator frequency : 20kHz to 500kHz.
  • Variable dead timer provides control over total range.

📥 Download Datasheet

Datasheet preview – TL5001

Datasheet Details

Part number TL5001
Manufacturer UTC
File Size 317.96 KB
Description Pulse-Width-Modulation Controller
Datasheet download datasheet TL5001 Datasheet
Additional preview pages of the TL5001 datasheet.

📁 Similar Datasheet

  • TL5001 - PULSE-WIDTH-MODULATION CONTROLLER (Texas Instruments)
  • TL5001A - PULSE-WIDTH-MODULATION CONTROLLER (Texas Instruments)
  • TL5001A-Q1 - PULSE-WIDTH-MODULATION CONTROLLER (Texas Instruments)
  • TL5002 - Pulse-Width-Modulation Controller (Texas Instruments)
  • TL507C - Analog-to-Digital Converter (Texas Instruments)
  • TL507I - Analog-to-Digital Converter (Texas Instruments)
  • TL50BLBGYRQ - Beacon Tower Light (Banner Engineering)
  • TL50BLGRQ - Beacon Tower Light (Banner Engineering)
  • TL50BLGYRQ - Beacon Tower Light (Banner Engineering)
  • TL50BLRQ - Beacon Tower Light (Banner Engineering)
Other Datasheets by UTC
  • TL594 - Pulse-Width-Modulation Controller

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD TL5001 LINEAR INTEGRATED CIRCUIT PULSE-WIDTH-MODULATION CONTROL CIRCUITS  DESCRIPTION The UTC TL5001 incorporates on a single monolithic chip all the functions required for a pulse width modulation (PWM) control circuit. Designed primarily for power-supply control, It contains an error amplifier, a regulator, an oscillator, a PWM comparator with a dead-time-control input, undervoltage lockout (UVLO), short-circuit protection (SCP) and an open-collector output transistor. The error-amplifier common-mode voltage ranges from 0V to 1.5V. The noninverting input of the error amplifier is connected to a 1-V reference. Dead-time control (DTC) can be set to provide 0% to 100% dead time by connecting an external resistor between DTC and GND.
Published: |