U74AUC244 Datasheet PDF - UTC OCTAL BUFFER/DRIVER Specs

U74AUC244 - OCTAL BUFFER/DRIVER

Datasheet Summary

Description

This octal buffer/driver is operational at 0.8V to 2.7V VCC, but is designed specifically for 1.65V to 1.95V VCC operation.

The U74AUC244 is organized as two 4-bit line drivers with separate output-enable ( OE ) inputs.

When OE is low, the device passes data from the A inputs to the Y outputs.

Features

S.
Optimized for 1.8V Operation and is 3.6V I/O Tolerant to Support Mixed-Mode Signal Operation.
Partial-Power-Down Mode Operation.
Low Power Consumption, 20μA Max. ICC.
±8mA Output Drive at 1.8V.

Datasheet Details

Part number	U74AUC244
Manufacturer	UTC
File Size	320.21 KB
Description	OCTAL BUFFER/DRIVER
Datasheet	U74AUC244 Datasheet
Additional preview pages of the U74AUC244 datasheet.

📁 Similar Datasheet

U74AUC1G00 - SINGLE 2-INPUT NAND GATE (Unisonic Technologies)

U74AUC1G02 - SINGLE 2-INPUT NOR GATE (Unisonic Technologies)

U74AUC1G08 - SINGLE 2-INPUT AND GATE (Unisonic Technologies)

U74AUC1G126 - SINGLE BUS BUFFER GATE (Unisonic Technologies)

U74AUC1G32 - SINGLE 2-INPUT POSITIVE-OR GATE (Unisonic Technologies)

U74AUC1G86 - SINGLE 2-INPUT EXCLUSIVE-OR GATE (Unisonic Technologies)

U74AUP1G00 - SINGLE 2-INPUT NAND GATE (Unisonic Technologies)

U74AUP1G02 - SINGLE 2-INPUT NOR GATE (Unisonic Technologies)

U74AUP1G06 - LOW-POWER SINGLE INVERTER BUFFER/DRIVER (Unisonic Technologies)

U74AUP1G07 - LOW-POWER BUFFER (Unisonic Technologies)

Full PDF Text Transcription

Click to expand full text

UNISONIC TECHNOLOGIES CO., LTD U74AUC244 Advance OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS CMOS IC  DESCRIPTION This octal buffer/driver is operational at 0.8V to 2.7V VCC, but is designed specifically for 1.65V to 1.95V VCC operation. The U74AUC244 is organized as two 4-bit line drivers with separate output-enable ( OE ) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using IOFF.

Published: Oct 21, 2023 |