Datasheet4U Logo Datasheet4U.com

U74HC273 Datasheet Octal D-type Flip-flops

Manufacturer: Unisonic Technologies

Overview: UNISONIC TECHNOLOGIES CO., LTD U74HC273 OCTAL D-TYPE FLIP-FLOPS WITH CLEAR.

General Description

The U74HC273 devices are positive-edge-triggered D-type flip-flops with a direct active low clear (CLR) input.

Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock (CLK) pulse.

Clock triggering occurs at a particular voltage level and is not related directly to the transition time of the positive-going pulse.

Key Features

  • S.
  • Wide Operating Voltage Range of 2V to 6V.
  • Low Power Consumption, 80-μA Maximum ICC.
  • Typical tPD = 12ns.
  • ±4mA Output Drive at 5V.
  • Low Input Current of 1μA Maximum.
  • Contain Eight Flip-Flops With Single-Rail Outputs.
  • Direct Clear Input.
  • Individual Data Input to Each Flip-Flop.

More Datasheets from Unisonic Technologies

Part Number Description
U74HC2G02 2-INPUT NOR GATE
U74HC2G32 2-INPUT OR GATE
U74HC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
U74HC123 DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR
U74HC138 3-TO-8 LINE DECODERS / DEMULTIPLEXERS
U74HC14 HIGH-SPEED CMOS LOGIC HEX INVERTING SCHMITT TRIGGER
U74HC148 8-LINE TO 3-LINE PRIORITY ENCODERS
U74HC164 8-BIT SERIAL-IN AND PARALLEL-OUT SHIFT REGISTER
U74HC165 8-BIT PARALLEL-LOAD SHIFT REGISTER
U74HC1G06 SINGLE INVERTER

U74HC273 Distributor