Datasheet4U Logo Datasheet4U.com

U74HC4316A - QUAD SINGLE-POLE SINGLE-THROW ANALOG SWITCH

General Description

The U74HC4316A is a quad single pole, single throw analog switch (SPST).

Key Features

  • S.
  • CMOS low power dissipation.
  • High noise immunity.
  • Low ON resistance: 160 Ω (typical) at VCC-VEE=4.5V 120 Ω (typical) at VCC-VEE=6.0V 80 Ω (typical) at VCC-VEE=9.0V.
  • Logic level translation: To enable 5V logic to communicate with ±5V analog signals.
  • Typical break-before-make built in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
U74HC4046A PHASE LOCKED LOOP Unisonic Technologies
U74HC4049 HEX INVERTING HIGH-TO-LOW LEVEL SHIFTER Unisonic Technologies
U74HC4051 8-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER Unisonic Technologies
U74HC4052 DUAL 4-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER Unisonic Technologies
U74HC4053 TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER Unisonic Technologies

Other Datasheets by Unisonic Technologies

Part Number Description
U74HC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
U74HC123 DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR
U74HC138 3-TO-8 LINE DECODERS / DEMULTIPLEXERS
U74HC14 HIGH-SPEED CMOS LOGIC HEX INVERTING SCHMITT TRIGGER
U74HC148 8-LINE TO 3-LINE PRIORITY ENCODERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD U74HC4316A Preliminary QUAD SINGLE-POLE SINGLE-THROW ANALOG SWITCH  DESCRIPTION The U74HC4316A is a quad single pole, single throw analog switch (SPST). Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nS). When nS is LOW, the analog switch is turned off. When E is HIGH all four analog switches are turned off.Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.  FEATURES * CMOS low power dissipation * High noise immunity * Low ON resistance: 160 Ω (typical) at VCC-VEE=4.5V 120 Ω (typical) at VCC-VEE=6.0V 80 Ω (typical) at VCC-VEE=9.