Datasheet4U Logo Datasheet4U.com

U74LVC2T45 - DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER

Datasheet Summary

Description

This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails.

The A port is designed to track VCCA.

VCCA accepts any supply voltage from 1.65V to 5.5V.

Features

  • S.
  • Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.65-V to 5.5-V Power-Supply Range.
  • VCC Isolation Feature: If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State.
  • ±24mA Output Drive at 3.3V.
  • IOFF Supports Partial-Power-Down Mode Operation CMOS IC SOP-8 www. unisonic. com. tw Copyright © 2022 Unisonic Technologies Co. , Ltd 1 of 15 QW-R126-081.a U74LVC2T45 Preliminary.

📥 Download Datasheet

Datasheet preview – U74LVC2T45

Datasheet Details

Part number U74LVC2T45
Manufacturer UTC
File Size 289.77 KB
Description DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER
Datasheet download datasheet U74LVC2T45 Datasheet
Additional preview pages of the U74LVC2T45 datasheet.

📁 Similar Datasheet

  • U74LVC240 - OCTAL BUFFER/DRIVER (Unisonic Technologies)
  • U74LVC244 - OCTAL BUFFER/DRIVER (Unisonic Technologies)
  • U74LVC245 - OCTAL BUS TRANSCEIVER (Unisonic Technologies)
  • U74LVC2G00 - DUAL 2-INPUT POSITIVE-NAND GATE (Unisonic Technologies)
  • U74LVC2G02 - DUAL 2-INPUT POSITIVE-NOR GATE (Unisonic Technologies)
  • U74LVC2G04 - DUAL INVERTER (Unisonic Technologies)
  • U74LVC2G06 - INVERTERS (Unisonic Technologies)
  • U74LVC2G07 - BUFFERS (Unisonic Technologies)
  • U74LVC2G08 - DUAL 2-INPUT AND GATE (Unisonic Technologies)
  • U74LVC2G125 - DUAL BUS BUFFER GATE (Unisonic Technologies)
Other Datasheets by UTC

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD U74LVC2T45 Preliminary DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION  DESCRIPTION This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65V to 5.5V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for universal low Voltage bidirectional translation between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes. The U74LVC2T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs.
Published: |