DESCRIPTION
CMOS IC When the output-enable ( OE ) input is high, the Q outputs are in a high-impedance state, and the outputs neither load nor drive the bus lines. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. While the outputs are in the high-impedance state, old data can be retained or new data can be entered, i.e. OE does not affect the internal operations of the latches. When OE is low, the Q outputs are in a normal logic state (high or low levels). The U74LVC563 is designed for 1.65V to 3.6V operation. Inputs can be driven from either 3.3V or 5V devices, so the U74LVC563 can be used in a mixed 3.3V/5V system environment. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. FEATURES
* Wide supply voltage range from 1.65V to 3.6V * Max tPD...
Unisonic Technologies
