Datasheet4U Logo Datasheet4U.com

UB2017 - ONE-CELL STANDALONE LINEAR LITHIUM BATTERY CHARGER

General Description

UTC UB2017 is a complete, constant current and constant voltage linear charger for single cell lithium-ion batteries.

Its small size and ability to regulate low charge currents make UTC UB2017 especially well-suited for portable applications using low capacity rechargeable lithium-ion coin cells.

Key Features

  • S 54 6 1 23 SOT-26.
  • Programmable Charge Current Up to 500mA.
  • No External MOSFET, Sense Resistor or Blocking Diode Required.
  • Complete linear charger in Thin SOT Package for Single Cell / Coin Cell Lithium-lon Batteries.
  • Constant Current / Constant Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating.
  • Charges Single Cell Li-lon Batteries Directly form USB Port.
  • Preset 4.2V Charge Voltage with High Accuracy about ±1.2%.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UB20BCT Dual Common-Cathode Ultrafast Plastic Rectifier Vishay
UB20CCT Dual Common-Cathode Ultrafast Plastic Rectifier Vishay
UB20DCT Dual Common-Cathode Ultrafast Plastic Rectifier Vishay
UB2 Miniature Signal Relay NEC
UB232R USB Mini-B FT232R Evaluation Module FTDI

Other Datasheets by Unisonic Technologies

Part Number Description
UB2011 CHARGE MANAGEMENT
UB2012 ADVANCED LINEAR CHARGE MANAGEMENT
UB2016 ONE-CELL STANDALONE LINEAR LITHIUM BATTERY CHARGER
UB209A BATTERY PROTECTION IC
UB209B BATTERY PROTECTION IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UB2017 ONE-CELL STANDALONE LINEAR LITHIUM BATTERY CHARGER CMOS IC  DESCRIPTION UTC UB2017 is a complete, constant current and constant voltage linear charger for single cell lithium-ion batteries. Its small size and ability to regulate low charge currents make UTC UB2017 especially well-suited for portable applications using low capacity rechargeable lithium-ion coin cells. Furthermore, UTC UB2017 is specifically designed to work within USB power specifications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor.