Datasheet4U Logo Datasheet4U.com

UC3873B - LOW COST POWER-SAVING MODE PWM CONTROLLER

General Description

The UC3873B is a high performance current mode PWM controller ideally suited for low standby power.

standby power.

Key Features

  • S.
  • UTC proprietary frequency hopping technology for Improved EMI performance.
  • Power-saving mode for high light-load and standby efficiency.
  • Soft Start.
  • Dynamic peak current limiting for constant output power.
  • Built-in synchronized slope compensation.
  • OLP,OVP and VDD clamp for higher security.
  • -500/+500mA gate driver.
  • Programming OTP for higher security.
  • Fixed switch frequency 100kHz.
  • Gate output voltage clamped at 15V.
  • Low start-up curren.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UC3871 Resonant Fluorescent Lamp Driver Unitrode
UC3872 Resonant Lamp Ballast Controller Unitrode
UC3874-1 Step-down (Buck) Controllers Unitrode
UC3874-2 Step-down (Buck) Controllers Unitrode
UC3875 Phase Shift Resonant Controller Unitrode

Other Datasheets by Unisonic Technologies

Part Number Description
UC3873 LOW COST POWER-SAVING MODE PWM CONTROLLER
UC3873C LOW COST POWER-SAVING MODE PWM CONTROLLER
UC3873H LOW COST POWER-SAVING MODE PWM CONTROLLER
UC3873HL LOW COST POWER-SAVING MODE PWM CONTROLLER
UC3873L LOW COST POWER-SAVING MODE PWM CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UC3873B LINEAR INTEGRATED CIRCUIT LOW COST POWER-SAVING MODE PWM CONTROLLER FOR FLYBACK CONVERTERS „ DESCRIPTION The UC3873B is a high performance current mode PWM controller ideally suited for low standby power. Low VDD startup current make the power reliable on startup design and a large 54 6 23 1 SOT-26 value resistor could be used in the startup circuit to minimize the standby power. At no load condition, the IC operates in power-saving mode for lower standby power, decreasing frequency for Higher conversion efficiency at light load condition.