Unisonic Technologies UC3973
The UC3973 is a high performance current mode PWM controller ideally suited for low standby power. The UC3973 contains protection with automatic recovery including OLP (over load protection), programming OTP (over SOP-8 temperature protection), OVP (over voltage protection), UVLO (VDD over voltage clamp and under voltage lockout).To protect the power MOSFET, Gate-drive output is fixed up to 16V max. The UC3973 contains protection OCP (cycle-by-cycle current limiting).| Part No. | UC3973 |
|---|---|
| Datasheet | UC3973 Download |
| Manufacturer |  Unisonic Technologies |
| Description | PWM CONTROLLER |
| Buy | Stock & Price |
DESCRIPTION
Low VDD startup current make the power reliable on startup design and a large value resistor could be used in the startup circuit to minimize the standby power. At no load condition, the IC operates in power-saving mode for lower standby power, decreasing frequency for Higher conversion efficiency at light load condition. The internal slope compensation improves system stability at high PWM duty cycle output. Leading-edge blanking on current sense input removes the signal glitch, which offering minimal external component count in the design. Excellent EMI performance is achieved with UTC proprietary frequency hopping technique (ZL201020615247.1) together with soft driver control. Audio noise is eliminated due to switch frequency more than 20kHz during operation. The UC3973 has such applications as: battery charger, power adaptor, set-top box power supplies, ink jet printers, open-frame SMPS.●
FEATURES
* UTC proprietary frequency hopping technology for Improved EMI performa...
