Unisonic Technologies UHC188
UHC188 is an integrated Hall effect latched sensor designed for electronic commutation of brush-less DC motor applications. The device using HVCMOS process includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and open-collector output. The output state is held until a magnetic flux density reversal falls below Brp causing OUT to be turned off (high).| Part No. | UHC188 |
|---|---|
| Datasheet | UHC188 Download |
| Manufacturer |  Unisonic Technologies |
| Description | SINGLE OUTPUT HALL EFFECT LATCH |
| Buy | Stock & Price |
DESCRIPTION
UTC An internal band-gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. If a magnetic flux density larger than threshold Bop, OUT is turned on (low).●
FEATURES
* 2.8V~30V DC operation voltage * Temperature compensation * Wide operating voltage range * Open-Drain pre-driver * 25mA maximum sinking output current.● ORDERING INFORMATION Ordering Number Lead Free Halogen Free UHC188L-AE3-R UHC188G-AE3-R UHC188L-G03-B UHC188G-G03-B UHC188L-G03-K UHC188G-G03-K Note: Pin Assignment: I: VDD G: GND O: Output Package SOT-23 SIP-3 SIP-3 Pin Assignment 1 2 3 I O G I G O I G O Packing Tape Reel Tape Box Bulk Copyright © 2023 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-C20.F UHC188
● MARKING SOT-23
● PIN CONFIGURATION SIP-3 CMOS IC
● PIN
DESCRIPTION
PIN NAME VDD GND Output Supply voltage Ground Output voltage● BLOCK DIAGRAM VDD Regulator Hall Plate + Amp. -
DESCRIPTION
Control Logic GND OUT UNISONIC...
