Datasheet4U Logo Datasheet4U.com

UIC811 - MICROPROCESSOR RESET

General Description

The UTC UIC811 series are resetting circuits which can monitor power supplies especially in microprocessor based systems.

Key Features

  • S 2 1 SOT-23 (EIAJ SC-59) 2 1 SOT-23-3 (JEDEC TO-236) 3 4 3 4 2 1 12 SOT-143 SOT-343.
  • Voltage monitor for 3V or 3.3V or 5V power supplies.
  • Valid RESET remains with VCC as low as 1V.
  • Typical supply current: 5µA.
  • Fixed 140ms minimum reset pulse width.
  • With Manual reset input.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UIC809 MICROPROCESSOR RESET CIRCUITS Unisonic Technologies
UIC4102CP extension cable between USB device and host ETC
UIC4202 USB 2.0 controller YOChip

Other Datasheets by Unisonic Technologies

Part Number Description
UIC812 VOLTAGE MONITORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UIC811 MICROPROCESSOR RESET CIRCUITS 3 CMOS IC 3  DESCRIPTION The UTC UIC811 series are resetting circuits which can monitor power supplies especially in microprocessor based systems. In normal operation, the UTC UIC811 series can assert a reset under any of the following situation: the power supply drops below a designated reset threshold level (which is available for 3V or 3.3V or 5V system) or MR is forced low. There is an internal active low RESET output which has already been guaranteed to remain asserted for at 140ms least while VCC rises above the designed threshold level.  FEATURES 2 1 SOT-23 (EIAJ SC-59) 2 1 SOT-23-3 (JEDEC TO-236) 3 4 3 4 2 1 12 SOT-143 SOT-343 * Voltage monitor for 3V or 3.