Datasheet4U Logo Datasheet4U.com

ULV1012 - PRE-AMPLIFIED

General Description

The UTC ULV1012 is high gain, high impedance per-amplifier which is designed to replace the JFET amplifier currently being used.

The UTC ULV1012 audio amplifiers are specified to operate over a 2.2V to 5.0V supply voltage range with fixed gains of 7.8dB, 15.6dB, 20.9dB, and 23.8dB.

Key Features

  • S.
  • Typical ULV1012-15, 2.2V Supply, RL=2.2kΩ, C=2.2μF, VIN=18mVPP, Unless Otherwise Specified.
  • Supply Voltage: 2V ~ 5V.
  • Supply Current:.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ULV1546 20V HIGH CURRENT DRIVE RAIL-TO-RAIL VCOM/GAMMA BUFFER Unisonic Technologies

Other Datasheets by Unisonic Technologies

Part Number Description
ULV2333 RAIL-TO-RAIL INPUT/OUTPUT CMOS DUAL OPERATIONAL AMPLIFIERS
ULV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
ULV2702 NANOPOWER OPERATIONAL AMPLIFIERS AND PUSH-PULL COMPARATORS
ULV333 RAIL-TO-RAIL INPUT/OUTPUT CMOS SINGLE OPERATIONAL AMPLIFIERS
ULV377 SINGLE CMOS OPERATIONAL AMPLIFIERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD ULV1012 Preliminary ANALOG SERIES: PRE-AMPLIFIED IC'S FOR HIGH GAIN 2-WIRE MICROPHONES  DESCRIPTION The UTC ULV1012 is high gain, high impedance per-amplifier which is designed to replace the JFET amplifier currently being used. The UTC ULV1012 audio amplifiers are specified to operate over a 2.2V to 5.0V supply voltage range with fixed gains of 7.8dB, 15.6dB, 20.9dB, and 23.8dB. The devices offer excellent THD, gain accuracy and temperature stability as compared to a JFET microphone. The UTC ULV1012 series is ideally suited for applications requiring high signal integrity in the presence of ambient or RF noise, such as in cellular communications.