Datasheet4U Logo Datasheet4U.com

US2075A - DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH

General Description

The UTC US2075A is a dual channel power switch with independent enable and flag functions, optimized for bus-powered Universal Serial Bus (USB) and self-powered applications.

Key Features

  • 100 µA MAX operating current.
  • 5µA MAX standby current.
  • 3.5V ~ 5.5V operating range.
  • Two P-channel power MOSFET control switch.
  • Over-current protection.
  • Under-voltage lockout circuit.
  • Thermal shutdown circuit.
  • Soft-start circuit.
  • Flag indicates fault conditions.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
US2075 PWM SWITCHER CONTROLLER & 7.5A LOW DROPOUT REGULATOR COMBO UNISEM
US2075C DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH Unisonic Technologies
US2076 PWM SWITCHER CONTROLLER & 7.5A ADJUSTABLE LOW DROPOUT REGULATOR COMBO UNISEM
US2076 DUAL USB HIGH-SIDE POWER SWITCH Unisonic Technologies
US2076A DUAL USB HIGH-SIDE POWER SWITCH Unisonic Technologies

Other Datasheets by Unisonic Technologies

Part Number Description
US202A POWER DISTRIBUTION SWITCHES
US206 POWER DISTRIBUTION SWITCH
US211 HIGH-SIDE POWER SWITCHES
US211A HIGH-SIDE POWER SWITCHES
US211B HIGH-SIDE POWER SWITCHES

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com UNISONIC TECHNOLOGIES CO., LTD US2075A DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH FOR USB DESCRIPTION The UTC US2075A is a dual channel power switch with independent enable and flag functions, optimized for bus-powered Universal Serial Bus (USB) and self-powered applications. This product satisfies USB voltage drop requirement with soft start, which eliminates the momentary voltage drop on the upstream port that may occur. In addition, the UTC US2075A is equipped with over-temperature and over-current detectors, each flag output is available to indicate fault conditions independently to the USB controller. The UTC US2075A is available in active-low versions in 8-pin SOP package.